QUALIFICATION

QUALIFICATION

SUBJECT

Degree in Mining Engineering OR Equivalent with Second Class Manager’s (Unrestricted/ Restricted) Certificate

One Paper (01) (L)

Diploma in Mining Engineering or Equivalent with Second Class Manager’s (Unrestricted/ Restricted) Certificate

Two Papers (03) (L,W)

Intermediate or Other Equivalent with Second Class Manager (Unrestricted/ Restricted) Certificate

Two Papers (02) (L,W)

INSTRUCTIONS

  • NAME- Name in the registration form should be same as in the SSC/MATRICULATION/10th CLASS CERTIFICATE.
  • GENDER- Mark the appropriate gender as per your category.
  • DATE OF BIRTH- Select the Date of Birth as per the government documents.
  • ADDRESS- Write the correct and complete postal mailing address with appropriate PINCODE.
  • E-MAIL and MOBILE NO.- Write the correct and active e-mail id and mobile no. During registration, OTP will be sent on you registered e-mail and mobile number.
  • PHOTO and SIGNATURE UPLOAD- Make sure you read the instructions properly and follow the correct size and format to update the photos and signature.
  • ACKNOWLEDGEMENT- Remember to save the pdf copy of acknowledgement for future purpose.
  • DOCUMENTS- Aspirants are advised to keep the scanned copy of photograph (size: 200kb) and signature (size: 200kb) before starting the registration process.
  • PAYMENT- Make sure to read instructions properly before making the payment.

SYLLABUS

WINNING AND WORKING

Geology: - Nature and occurrence of coal seams; description of Indian coalfields; application of geology to mining; geological structures; folds, faults, fractures, fissures etc., boring through disturbed strata; bore hole survey; indicated and proved coal reserves; interpretation of geological maps.

Opencast Mining: - Mine Planning, Opening of coal seams and preparation for excavation; box cut, types; selection of site; Layout of Opencast mine, parameters, formation of production benches; ripping; types of rippers; concept of rip ability and cycle of operation; drilling; blast hole drills; performance parameters; requirement of number of drills; blasting; blast design; factors influencing blast design; deep hold blasting; calculation of charge per hole; ground vibration; secondary blasting and problems and hazards related to blasting; cast blasting; environment friendly nonblasting techniques, safety aspects.

 

52 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]

Discontinuous / Cyclic Methods of Excavation and Transport: Shovel dumper operation; applicability of electric shovel and hydraulic excavators; cycle time and productivity calculation; estimation of equipment fleet; dragline operation; side casting; Dragline balancing diagram; calculation of reach; cycle time; productivity calculation; bucket capacity requirement; scrappers; types; methods of work; push pull operation etc.,

Bucket Wheel Excavator: - operational methods (lateral block, half block and full block etc.,) productivity calculation; continuous Surface Miner - operational methods

(Wide / Full base methods, wide / full bench, block mining, stepped cut, empty travel back, turn back and continuous mining methods); conveyors; shift able and high angle conveyors; mode of operation etc. OITDS operator independent truck dispatch system); in-pit crushing, Coal Handling Plants, Silo and rapid loading system, strip-mining; opencast mining over developed coal seams; high-wall mining; safety aspects.

Construction of Haul Roads and Ramps: - Width, super elevation / camber, central bund, side bund, slope, base, sub-base, surface, Surface friction, materials required, drainage, curve, visibility, machines to be used, maintenance, monitoring,

Haul road crossings, T-junction, tri-junction, four-way crossings, parameters, Parking of HEMM, parking of dump trucks, GO-line design, Shelter construction, view point construction.

Watering of mine roads for dust suppression, methods to be used and hazards due to overwatering, type of water spraying, spot or strip watering.

Extraction of Methane: - Surface to Inseam Methane Drainage, Coal Bed Methane, Abandoned Mine Methane and Gas content of Coal; Resource and Reserve estimation; Methods of drilling and precautions required while exploration and extraction of methane; Gas production rate, project life and economy; Methods of Collection and conveying/transportation of methane; Installation of extraction wells; Hazards involved.

Application of Concepts of Rock Mechanics for Designing the Methods of Mining and Strata Control: - Design and stability of structures in rock; design of support and reinforcement for open pits; Types of bench and dump slope failures,

Theories of ground movement and strata control; rock bolts, cable bolts; wire mesh; monitoring of rock mass performance, mechanics of rock fragmentation; Dump types, internal and out of pit dumps, Dump construction, size, shape, Site selection and preparation for dumping, Methods of dumping, machines required for dump construction, consolidated and unconsolidated dumps, slope stability; slope angle, benches, berms, factors affecting slope stability, design criteria and monitoring systems; dump stability; dump management.

Use and Safe Handling of Explosives: - Blasting techniques and their relative efficiency, total cost concept and safety precautions.

Danger from Different Sources of Water: - Precautions to prevent inundation, siltation, bench and dump failures; designing drainage system, calculation of catchment area, sump and pump capacity, water dams, retaining walls, siltation ponds, gabion walls, water danger plans,

Application of numerical modelling in mine design, application of computers in mine design and operational controls.

EXAMINATION SCHEDULE FOR MAGAGER'S COMPETENCY EXAMITATION (CBT)-2020

DAY

SESSION

Exam & Subject

19.02.2021

FN

FMR-L

 

SMU-L

 

FCR-W

 

SCU-W

 

AN

FMR-M

 

SMU-M

 

FCR-L

 

SCU-L

20.02.2021

FN

FMR-W

 

SMU-W

 

FCU-L

 

SCR-L

 

AN

FMR-S

 

SMU-S

 

FCU-W

 

SCR-W

21.02.2021

FN

FMU-L

 

SMR-L

 

FCU-V

 

SCR-S

 

AN

FMU-W

 

SMR-W

 

SCU-M

 

SMU-V

22.02.2021

FN

FMU-M

 

SMR-M

 

FCU-S (OLD)

 

SCU-S

 

AN

FMU-S

 

SMR-S

 

FCU-M(OLD)

 

SCR-M

23.02.2021

FN

FMU-V

 

SCU-V

Free Tests

Part Test 1

Railways
  • Questions

    40

  • Marks

    32

  • Duration

    60 min

Start Now

Test Series

Working - Coal(FMC-R) Mock Test

20 TOTAL TEST | 1 Free Tests
  • Full Test Working - Coal(FMC-R) - 10
  • Part Test Working - Coal(FMC-R) - 9
View Test Series

Quiz